OM2000A+ HF & 6m 2kW Automatic Amplifier

The OM2000A+ automatic linear amplifier is designed for all shortwave amateur bands from 1.8 to 29 MHz (including WARC – bands) plus 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F and delivers 2000 watt on HF and 1500 watt on 6 meter.

Built on order, delivery time 2-3 weeks.

6 199 kr

Available on backorder

Pay with

Specification of OM2000A+

Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz
Power output: 2000+ W in SSB/CW on HF bands, 1500 W in RTTY, 1500 W CW/SSB on 50 MHz
Input power: 40 to 60 W for full output power
Input impedance: 50 Ohm VSWR < 1.5 : 1
Output amplification: 17 dB
Output impedance: 50 Ohm unbalanced
Maximum output SWR: 3:1
SWR protection: Automatic switching to STBY when reflected power is 350W or higher
Intermodulation distortion: better than -32 dBc
Suppression of harmonics: min -50 dBc ( 30–54 MHz better than -70dBc)
Auto tune response time: 0,5s or less same band, 3s or less other band
Supported CAT: MB1, SunSDR2 PRO, Icom, Elecraft, Kenwood, Ten-Tec Orion, Yaesu, microHAM devices (CI-V OUPUT), Flex and Anan
Tube: FU-728F ceramic tetrode
Cooling: Centrifugal blower + axial blower
Power supply: Switchable 220, 230 , 240 V – 50/60 Hz or other primary voltages
(for example 200V 50/60Hz for Japan)
Transformers: 1 toroidal transformer 3 kVA
Protection circuits: – SWR too high
  – Anode current too high
  – Screen current too high
  – Grid current too high
  – Mistuning of power amplifier
  – Temperature to high
  – Soft start for fuse protection
  – Power on blocked when cabinet is opened
Indications: – 4.3″ colour touch screen display
Features: – Support automatic external Antenna switching
– Memory for faults and warning, easy maintenance
– Automatic set-up of anode current (BIAS ) – no need to manual adjust after changing the tube
– Automatic blower speed based on temperature
– QSK operation with built-in vacuum RF antenna relay
– The smallest and lightest 2000W PA on the market
Mechanical parameters: 390mm x 195mm x 370mm (width x height x depth)
Weight: 24 kg

For remote control and monitoring over LAN a special software is needed. It is available free of charge to download from our download section.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.